Make safety a Habit - The Hard hat
Release time: 2023-07-05
Use the helmet properly
1. Don't wear it askew
Don't wear the brim behind your head, either. Otherwise, it will reduce the protective effect of the helmet on the impact.
2. The lower tie of the helmet must be buckled under the chin and tied firmly
Tightness should be moderate. This will not be blown off by strong winds, or knocked off by other obstacles, or due to the head swinging back and forth, so that the helmet falls off.
3. Check regularly
The safety hat will gradually be damaged during use, so it is necessary to check regularly, check whether there is cracking, concave, cracks and wear, etc., and replace the abnormal phenomenon immediately, do not continue to use. Any hard-hit, cracked helmet, regardless of whether there is damage, should be scrapped.
4. Keep a distance between the top of your head and the top of your cap
It is strictly prohibited to use a helmet with only a chin strap connected to the cap shell, that is, a helmet without a buffer layer in the cap.
5, the new helmet, first check whether there is a labor department to allow the production of the certificate and product certification, and then see whether the damage, thickness is uniform, buffer layer and adjustment belt and elastic belt is complete and effective. If it does not meet the requirements, it shall be replaced immediately upon request.
6, in the indoor operation should also wear a safety helmet, especially in the indoor live operation, more seriously, because the safety helmet can not only prevent collision, but also play an insulation role.
7. Pay attention to the validity period
Pay attention to the use of safety hats within the validity period, the validity period of plastic safety hats is two and a half years, and the validity period of glass steel (including Vinylon steel) and rubber safety hats is three and a half years.
8, usually when using the safety hat should be kept clean, do not contact the fire, do not paint arbitrarily.
9, the user can not disassemble or add accessories on the helmet at will, so as not to affect its original protective performance.
10, the user can not adjust the size of the hat lining, which will directly affect the protective performance of the safety hat, once the impact occurs, the safety hat will be worn because of improper release or because of the impact of the top directly hurt the wearer.
11, do not open holes for ventilation
In addition to the hat lining installed inside the hat body at the top of the helmet body, some also opened small holes for ventilation. Do not open holes for ventilation when in use, because doing so will reduce the strength of the cap body.
12, the applicable temperature of the safety hat is -10℃ to 50℃, should be placed in a ventilated dry place when not in use.
Keywords: Make Safety a Habit - Safety Helmets
Our products are well-designed, comfortable to wear and durable. The quality of products is stable, and the variety is rich and diverse. Some products have passed the test, and they meet the EU CE standards and American ANSI standards, and have obtained certification certificates.
Jiyuan City Jinxing Mining Rubber Plastics Co., Ltd.
Service hotline: +86-4008866091
Email:jinxingfanghu2024@163.com
COPYRIGHT 2023 Jiyuan City Jinxing Mining Rubber Plastics Co.,Ltd This website supports ipv6
