The use and maintenance of personal protective equipment
Release time: 2025-08-06
1. Safety helmets
A safety helmet should be kept clean when used on a regular basis. When washing is necessary, the shell and lining of the helmet can be washed with cold or warm water (below 50 ° C), dried and air-dried in a cool place. Do not expose to heat sources to prevent the shell from deforming. Safety helmets should be stored away from acids, alkalis, high temperatures (above 50 ° C), direct sunlight, damp places, and protected from being squeezed by heavy objects or punctured by sharp objects. If lost or reaching the scrapping condition, it must be reissued or replaced immediately. Damaged safety helmets should be scrapped immediately. No one is allowed to enter the construction site without a safety helmet.
2. Safety belts
The parts of the seat belt must not be removed at will. When fabric parts are contaminated, they should be washed with water and neutral soap. Do not use acidic or alkaline solvents. Do not store with high temperatures, open flames, strong acids, strong bases or sharp objects, and do not store in damp places. During storage, the equipment should be subject to regular visual inspection. If any abnormality is found, it must be replaced immediately. The frequency of inspection should be determined based on the frequency of use. When not in use, safety belts should be kept by a designated person.
3. Air breathing apparatus
It should be kept in a closed, dry storage cabinet at a temperature of 0 to 30 ° C. Take care to prevent moisture and avoid direct sunlight. When heating equipment is available, keep more than 1.5 meters away from it. It should be placed in a clean and well-ventilated environment. The storage environment should not cause physical or chemical damage to the air respirator and should not cause deformation of the back plate and mask.
4. Eye (face) Protective equipment
Keep clean and avoid contact with acids, alkalis and other harmful substances; Protect from rain, heavy pressure, handle with care to prevent breakage; Wipe with special eyeglass wiping paper; Oil stains can be cleaned with a neutral detergent. Rinse thoroughly with clean water and dry with a soft cloth (or paper towel).
After the implementation of the Safety Management Specification for Personal Protective Equipment, enterprises should equip, use and manage personal protective equipment in accordance with the standard. Users should also be aware that the efficiency of any labor protection equipment may decrease over time and with repeated use, and proper maintenance is necessary to ensure the normal use of labor protection equipment.
Keywords:
07/07
Our products are well-designed, comfortable to wear and durable. The quality of products is stable, and the variety is rich and diverse. Some products have passed the test, and they meet the EU CE standards and American ANSI standards, and have obtained certification certificates.
Jiyuan City Jinxing Mining Rubber Plastics Co., Ltd.
Service hotline: +86-4008866091
Email:jinxingfanghu2024@163.com
COPYRIGHT 2023 Jiyuan City Jinxing Mining Rubber Plastics Co.,Ltd This website supports ipv6
